LCD Screen Repairs On Laptops

Is the LCD display in your laptop malfunctioning? Do you find the monitor quality degrading? If you've started to experience problems with your LCD screen, I highly encourage that you read every last word in this post. In this article, you will learn what you must do to fix your LCD screen in the fastest as well as the most economic way possible.

In earlier times, a lot of people were required to purchase a new LCD monitor in case the screen failed as there was no other viable option. The LCD monitor repair shops wasn't really accessible and the expenses of repair weren't worth it.

During the repair the LCD panel along with the battery was necessary to be replaced. This led to a lot of people opting to buy a new Laptop instead of repairing an existing unit.

There are several LCD monitor problems that could be repaired and others which could not be repaired. If you notice vertical lines or bad pixels on your display, the only real option is to replace the LCP panel. If you experience problems like black displays, flickering and dimness, you don't need to change the panel. It is just an easy maintenance process.

Before you decide to mess with your laptop, be certain that it's out of warranty. Never mess with your laptop by opening it when it's still in warranty. If some circuit in the laptop fails because you didn't follow the required precautions, you won't be able to get it exchanged. So be certain that the product is well out of warranty before trying something.

Here is the right way to dismantle your laptop and discover the cause of the problem...

1. Turn it off

Switch off your laptop fully and wait for a few minutes. It's important for the laptop to cool down before you begin messing with it. Make sure that you remove the AC power cord from your laptop.

When the AC power cord is disconnected, remove the battery from its dock (that is under your laptop). I encourage you to wear an anti-static wrist strap ahead of dismantling any device whether it's your laptop or personal computer.

2. Remove plastic frame

The laptop screen is kept in place with a plastic frame known as bezel. You have to pull away this plastic frame by taking out the screws that hold it. In some models, you may have to dislodge certain rubber seals before dismantling the screws (which are below the seals). Make sure that you read your product's manual carefully before dismantling it.

3. Examine the cable connections

Once you have pulled the frame away successfully, it's time to check the cable connections. The screen has mainly two cable connections:

- A connection to the inverter board through a power cable

- A connection to the mother board via a video cable

Unplug these cables and reconnect them. After connecting them, switch your screen on.

Should you have the same problem, you might need to swap the inverter it's connected to. This step generally fix most of the minor problems. For more details about Apple Screen and Dell Screen , Please visit us.